Home Page

Introduction

Aluminium Extrusion

Roller Covers

Flight Bar Pads

Walking Beam Pad

Cooling Table Pad

Endless Belts

Glass Industry 

Conveyor Belts

New Combo Belts

Tapes and Ropes

Seamless Tubing

Fabricated Pads 

Other Markets

Specifications

Product Properties

Treatments

No Charge Sample

HEAT RESISTANT TEXTILES & BELTING
TRANSFER ARM & WALKING BEAM PADS
Designed and Engineered for Aluminum Extrusion Handling Systems


Cost-Effective and Completely Non-Marking.
An Excellent Replacement to Carbon / Graphite

Although Transfer Arms and Walking Beams do not typically see temperatures or abrasion as great as that seen on the Run Out Table, the
process is still highly dynamic in nature and it requires a material with a high degree of temperature resistance, abrasion resistance and cushioning. Our Transfer Arm Pads
and Walking Beam Pads are ideally suited for this purpose. 

TUFF TEMP 2-ply, nominal 1/4" (6 mm) thick and nominal 3/8" (9 mm) thick 100% para-aramid synthetic fiber belting, Wear Gard or Wear Gard Plus treated, provide outstanding durability and wear life for your handling system. Higher thickness, multiple ply pads are available if needed, although they are not often required for this area of you process. All pads can be fabricated to your specific width and length requirements, up to a 24" (610 mm) width maximum, with no defined limitation on length. 


It is our pleasure to supply you with No Charge
product samples for head to head comparison
testing. This is the best way for us to prove our
value to you, and we welcome the opportunity to do so! 

Nokta Metal Ltd.
Ismailpasa Sokak No: 50 Kosuyolu, Kadikoy, 34718 Istanbul, Turkiye
Tel : +90 (216) 545 7550 / Fax: +90 (216) 545 7549 
Email